Pipe

Pipe - Carbon Steel ASTM A53

This product may be used for mechanical or pressure applications. It is pressure tested for use with air, water, or gas lines. Many sizes are available in a preprimered produce called Kleenkote. Some sizes available in bare wall. Inquire on your specific needs.
Tensile Strength 48,000 psi
Yield Strength 30,000 psi

Nominal Size in Inch	Wt per Ft. in Lbs.	O.D. in Inches	Wall Thickness Inches	Schedule Duty
1	1.41	1.315	0.109	10 - Light Wall
1 1/4	1.81	1.660	0.109	10 - Light Wall
1 1/2	2.09	1.900	0.109	10 - Light Wall
2	2.64	2.375	0.109	10 - Light Wall
1/8	0.24	0.405	0.068	40 - Standard
1/4	0.42	0.540	0.088	40 - Standard
3/8	0.57	0.675	0.091	40 - Standard
1/2	0.85	0.840	0.109	40 - Standard
3/4	1.13	1.050	0.113	40 - Standard
1	1.68	1.315	0.133	40 - Standard
1 1/4	2.27	1.660	0.14	40 - Standard
1 1/2	2.72	1.900	0.145	40 - Standard
2	3.65	2.375	0.154	40 - Standard
2 1/2	5.79	2.875	0.203	40 - Standard
3	7.58	3.500	0.216	40 - Standard
3 1/2	9.11	4.000	0.226	40 - Standard
4	10.79	4.500	0.237	40 - Standard
5	14.62	5.563	0.258	40 - Standard
6	18.99	6.625	0.28	40 - Standard
8	25.58	8.625	0.322	40 - Standard
10	40.47	10.750	0.365	40 - Standard
12	49.56	12.750	0.375	40 - Standard
14	54.57	14.000	0.375	40 - Standard
16	62.58	16.000	0.375	40 - Standard
1/4	0.54	0.540	0.119	80 - Standard
3/8	0.74	0.675	0.126	80 - Standard
1/2	1.09	0.840	0.147	80 - Standard
3/4	1.47	1.050	0.154	80 - Standard
1	2.17	1.315	0.179	80 - Standard
1 1/4	3.00	1.660	0.191	80 - Standard
1 1/2	3.63	1.900	0.2	80 - Standard
2	5.02	2.375	0.218	80 - Standard
2 1/2	7.66	2.875	0.276	80 - Standard
3	10.25	3.500	0.3	80 - Standard
3 1/2	12.51	4.000	0.318	80 - Standard
4	14.98	4.500	0.337	80 - Standard
5	20.78	5.563	0.375	80 - Standard
6	28.58	6.625	0.432	80 - Standard
8	43.43	8.625	0.5	80 - Standard
10	54.74	10.750	0.5	80 - Standard
12	65.42	12.750	0.5	80 - Standard
14	72.09	14.000	0.5	80 - Standard
16	82.77	16.000	0.5	80 - Standard

Pipe - Carbon Steel - Bare Structural Pipe (pipe size tube)

This product is a tube that is sized the same as pipe but does not have the pressure testing. It is intended for structural use only.
It has a clean finish and is stronger than pipe, conforms to ASTM A513 and ASTM A500 Grade B.
Tensile Strength 58,000 psi – Yield Strength 42,000 psi

Nominal Size in Inch	Wt per Ft. in Lbs.	O.D. in Inches	Wall Thickness Inches
1/2	0.85	0.840	0.109
3/4	1.13	1.050	0.113
1	1.68	1.315	0.133
1 1/4	2.27	1.660	0.134
1 1/2	2.72	1.900	0.134
2	3.66	2.375	0.148
2 1/2	5.79	2.875	0.203
3	7.58	3.500	0.216
3 1/2	9.12	4.000	0.226
4	10.79	4.500	0.237
5	14.62	5.563	0.258
6	18.99	6.625	0.280
8	28.58	8.625	3.220

Inquire for shapes, sizes and grades not listed.